LabForge
Pricing

Buy one recipe. Or the capacity to stop turning jobs away.

Published prices. Describe your job and we send a secure payment link — no sales call required. Every recipe is calculated for your exact chamber and includes 3 revisions plus 1 deep analysis — the recipe is refined against your real run data until it behaves on your machine.

Start here

Single Recipe

The de-risked first buy. See what the engine does on one real job.

$599 one-time

1 equipment-ready recipe

  • 1 recipe, calculated for your chamber
  • 3 revisions + 1 deep analysis against your real run data
  • Hardware-aware — your source, power supply, gas lines
  • Failure-mode warnings included
  • Expected results and QC acceptance criteria
Request this recipe We email a secure Stripe payment link after your order

Recipe Packs

Prepaid credits for shops with a queue. Two years to use them — no monthly pressure.

from $449 / recipe

prepaid credits · resellable by approved partners

5-Recipe Pack $2,495 $499/recipe
20-Recipe Pack $8,980 $449/recipe
  • Credits valid 24 months — use them when the job lands
  • Resellable by approved partners — deliver under your own brand
  • Every recipe still includes revisions and a deep analysis
Request a pack We email a secure Stripe payment link after your order
Most capacity

Professional

For shops running multiple materials, every month.

$2,299 / month

4 recipes / month · rollover

  • 4 recipes per month — unused recipes roll over
  • All revisions & deep analyses included
  • Saved chamber profiles — describe your tool once
  • Priority turnaround
  • Troubleshooting on live process problems
  • Extra recipes bill as pack credits
Start Professional We email a secure Stripe payment link after your order

Enterprise

For teams running 10+ recipes a month — and partners reselling at volume.

Talk to sales

custom volume · white-label

  • 10+ recipes per month
  • Equipment-gap analysis across your fleet
  • Supplier recommendations
  • Novel-material support
  • ROI dashboard
  • White-label for consultants and partners
Talk to sales Response promptly
Run the arithmetic

A scrapped reactive-sputter run costs $300–$1,500. Failed tuning wastes roughly $50–60K per machine, per year. One avoided failed run covers a Single Recipe. Two cover a 5-Pack. About two months of typical tuning waste covers the 20-Pack. LabForge is priced below the failure it prevents.

Compare

What each plan includes

Every plan is hardware-aware and every recipe ships with failure-mode warnings. The plans differ in capacity, speed, and what wraps around the recipe.

Feature Single Packs Professional Enterprise
Price $599 one-time $2,495 / $8,980 $2,299 per month Custom
Recipes 1 5 or 20 credits 4 per month, rollover 10+ per month
Effective per-recipe cost $599 $499 / $449 $575 or less with rollover Volume pricing
3 revisions + 1 deep analysis per recipe Included Included all included all included
Hardware-aware calculation Included Included Included Included
Failure-mode warnings Included Included Included Included
Credit validity — 24 months Rollover while active Per agreement
Resellable credits Not included Included, approved partners Not included Included, white-label
Saved chamber profiles Not included Not included Included Included
Priority turnaround Not included Not included Included Included
Troubleshooting support Not included Not included Included Included
Equipment-gap analysis Not included Not included Not included Included
Supplier recommendations Not included Not included Not included Included
Novel-material support Not included Not included Not included Included
ROI dashboard Not included Not included Not included Included

✓ = included · — = not included. Table scrolls horizontally on small screens.

Calibrated to your machine — the revision guarantee

The engine computes the physical requirement exactly. What no spec sheet can tell it is how far your specific tool has drifted from its nameplate — an eroded target changing plasma density, a mass-flow controller reading high after hundreds of hours, a thermal sensor offset by buildup. So the first run is also a measurement: you report what the film actually did — rate, stress, adhesion, appearance — and the engine baselines your hardware's real state against the computed ideal and locks the spec to that measured offset. Every recipe includes 3 revisions and 1 deep analysis for exactly this. The deliverable is not a document; it is a process that works on your machine.

The remedy is the work itself — the 3 revisions plus the deep analysis on your real runs. Purchases are non-refundable; there are no cash refunds. See our Terms (§6).

Not sure? Read a real recipe first.

We publish a redacted, real LabForge recipe so you can judge the rigor before spending a dollar.

Open the sample recipe Ask a question